RackscaleData Center Institute
Search & browse all 146 entries

Variable-Speed Hydronic Circulation Pump

#secondary-chilled-water-pump
Also called
  • secondary CHW pump
  • CDU circulation pump
  • lead/lag pump skid

Plain-English definition

A centrifugal liquid pump driven by a variable-frequency drive that circulates chilled water or secondary coolant through distribution headers, modulating impeller speed continuously to hold target differential pressure as rack or air-handler control valves open and close.

Why it matters on shift

Redundant lead/lag or N+1 pumps keep thermal loops alive during seal or drive faults, but only if check valves hold against reverse spinning and standby drives actually auto-start after voltage sags.

Illustrative operational example

In the illustrative NOC lab, a 140 ms Feeder B voltage sag trips pump CHW-P2B into an undervoltage VFD lockout (0.0 A); restarting the pump restores 68.5 A motor draw and 24.4 psi loop ΔP.

Scope, code & safety boundary

Before resetting a tripped circulation pump in a real plant, verify local Hand-Off-Auto (HOA) switch position, suction strainer state, mechanical seal integrity, and discharge check-valve seating.

Related courses & interactive lab practice

IntermediateRS-202~78 min open lessons
Signal Room

Building/power monitoring & alarm triage

BeginnerRS-103~85 min open lessons
Thermal Reality

Air, chilled-water & liquid cooling

Free interactive simulator
Campus Shift · 6-Mission Browser Lab

Practice live readings and switching in "120 kW GPU Direct-to-Chip CDU & Strainer Lab" with no login required.

Primary standards & technical references

Practice with the equipment

Try this concept in a live scenario.

Walk through six free guided browser missions in Campus Shift, or study all nine self-paced courses from Beginner to Advanced at $399 self-paced tuition ($1,600 list, save $1,201).