RackscaleData Center Institute
Search & browse all 146 entries

Adiabatic Fluid Cooler and Pre-Cool Pads

#adiabatic-fluid-cooler
Also called
  • adiabatic cooler
  • hybrid dry-adiabatic cooler
  • wetted pre-cool pads
  • pad misting

Plain-English definition

A closed-loop outdoor heat-rejection unit that operates as a zero-water dry finned coil during cool weather and wets fibrous pre-cooling pads or mist nozzles ahead of the air intake during hot weather, evaporatively depressing entering air temperature toward ambient wet-bulb without exposing loop fluid to outside air.

Why it matters on shift

Adiabatic coolers let arid or hot-summer campuses keep closed-loop water cleanliness and zero winter water draw while unlocking wet-bulb pre-cooling during summer dry-bulb spikes, trading metered pad water against chiller kW.

Illustrative operational example

In the illustrative Central Plant mission at 36.0°C DB / 18.5°C WB, Stage 1 wetted pads use 168 L/min to drop the fluid-cooler floor to 20.4°C, whereas Max Wet Mist (390 L/min + 72 L/min condenser = 462 L/min) breaches the 420 L/min drought permit.

Scope, code & safety boundary

Pad feedwater hardness, conductivity, and drain/flush cycles must follow OEM water-quality manuals closely to prevent mineral scaling on media pads or biological growth in sump trays.

Explanatory diagram · Dry fluid cooler & cooling tower yardDry-Bulb vs Wet-Bulb Heat-Rejection Floors and Positive Approach Temperature
Two-column comparison at 32.0 degrees Celsius dry-bulb and 20.0 degrees Celsius wet-bulb contrasting a dry fluid cooler leaving at 37.0 degrees Celsius (+5.0 degrees Celsius approach) against a cooling tower leaving at 24.5 degrees Celsius (+4.5 degrees Celsius approach).

Passive heat-rejection equipment always leaves warmer than its outdoor sink floor by a positive approach temperature: dry coolers approach outdoor dry-bulb, while evaporative towers and adiabatic coolers approach outdoor wet-bulb.

Read plain-text walkthrough of this diagram

Two-column comparison at an illustrative outdoor condition of 32.0 degrees C dry-bulb and 20.0 degrees C wet-bulb (roughly 32% relative humidity at sea level). Column 1 (Dry Fluid Cooler) uses zero air-side evaporation water and is bounded by the 32.0 degrees C dry-bulb floor, leaving at an illustrative 37.0 degrees C (+5.0 degrees C approach). Column 2 (Cooling Tower / Adiabatic Evaporative) evaporates water to lower the air-side sink to the 20.0 degrees C wet-bulb floor, leaving at an illustrative 24.5 degrees C (+4.5 degrees C approach). Neither passive system can cool fluid below its respective sink floor without mechanical chiller compressor work.

Related courses & interactive lab practice

IntermediateRS-302~75 min open lessons
Resource Ledger

Energy, water & capacity accounting

Free interactive simulator
Campus Shift · 6-Mission Browser Lab

Practice live readings and switching in "35 kW Hot/Cold Aisle Containment Lab" with no login required.

Primary standards & technical references

Practice with the equipment

Try this concept in a live scenario.

Walk through six free guided browser missions in Campus Shift, or study all nine self-paced courses from Beginner to Advanced at $399 self-paced tuition ($1,600 list, save $1,201).